Data Copy From The Tv To Sd Card - Panasonic TC-L42D2 Technical Manual

Data copy from the TV to SD Card

1. Turn on the TV set.
2. Insert the SD card that contains the startup file
(pwd file) in the SD card slot.
An On-screen display associated with the startup
file will appear automatically.
3. Input the following password for (a) or (b) by using
the remote control.
(a) For Board replacement : 2770
(b) For Hotel : 4850
Data will be copied from the TV set to the SD card.
It takes around 2 to 6 minutes maximum for
copying.
4. After the completion of copying to the SD card,
remove the SD card from the TV.
5. Turn off the TV.
Note:
The following new folder will be created in the SD
card from the TV.
(a) For Board replacement : user_setup
(b) For Hotel : hotel
Data Copy (Board Replacement)
Data Copy
Board replacement or
Hotel
Input Password --------
Panasonic
Data Copy (Board Replacement)
Input password
2770
Input Password ------- or
4850
Panasonic
Performing
Data Copy (Board Replacement)
Copy TV to SD Card
Please for a while
Please do not remove SD card
GETTING
Panasonic
Data Copy (Board Replacement)
Completion
(i.e. Exchanging
Data copy has been successful
replacement board)
Please remove SD card
FINISH
Panasonic
Slide # 93