Other Operations - Lenovo P0510 Quick Start Manual

Other Operations

Set Password
1. Follow the steps outlined in section A2.1 to enter the P0510 settings page,
and click to set password.
2. Once the password has been changed successfully, the P0510 will
automatically restart.
Notices
After you connect the P0510 to an available WiFi hotspot, smart devices
connected to the P0510 can connect to the Internet indirectly. If it is not password protected, other people
will be able to connect their devices to your WiFi hotspot via the P0510 without your authorization. It is
strongly recommended that you set a password for the P0510.
Upgrading Firmware
1. Follow the steps outlined in section A2.1 to enter the P0510 settings page, and click
firmware.
2. The upgrade process depends on your network environment. It will take at least five minutes, and the
P0510 will automatically reboot.
Notices
Throughout the P0510 firmware upgrade progress, please ensure that the projector is on charging status or
has no less than 40% power to support the upgrade.
Factory reset
Press and hold the Home button (9) on top of the P0510
settings prompt appears on screen. The password and previously connected WiFi hotspot information on
the P0510 will all be reset and the device will return to factory settings. P0510 default password is blank.
for 3 seconds, until the restore factory
10
to upgrade