Panasonic KX-NCP500 Installation Manual page 37

Activation Key Type
CA Supervisor 1user
Software Upgrade 01
*1 You need to set the number of the installed activation key to be used for H.323 trunks through system programming. By default, all
the installed activation keys will be used for SIP trunks.
*2 You can set how many IP softphones can be used with the installed activation keys through system programming. By default, only
IP softphones can be used with the installed activation keys.
Preinstalled Activation Keys in the DSP Cards
The following type and number of activation keys are preinstalled on the DSP card:
Card Type
DSP4
DSP16
DSP64
Depending on the number of IP trunks and IP-PTs to be used, you need to select the DSP card from the above.
Example: Preinstalled Activation Keys in the DSP16 Card
Additional Activation Keys in the SD Memory Card (Activation Key Files)
When the number of preinstalled activation keys on the DSP cards is not enough for the desired configuration
or when you wish to use enhanced features, additional activation keys in the form of activation key files can
be installed on the SD Memory Card.
The following type and number of additional activation keys can be installed on the SD Memory Card:
Description
Allows the use of CA ACD Monitor
for 1 ICD Supervisor.
Upgrades software to use enhanced
features.
Activation Key
4-Channel IP Trunk
8-Channel IP Proprietary
Telephone
4-Channel IP Trunk
8-Channel IP Proprietary
Telephone
4-Channel IP Trunk
8-Channel IP Proprietary
Telephone
Maximum Supported IP Trunks/IP
Number
4
1
Supported IP Trunks/IP-PTs
1 4 IP trunks (H.323/SIP)
1 8 IP-PTs
1 4 IP trunks (H.323/SIP)
1 8 IP-PTs
4 16 IP trunks (H.323/SIP)
4 32 IP-PTs
2.1.1 Activation Keys
Telephones/CA Users
4 users
-
Installation Manual 37