Inserting The Battery Pack And Memory Card - Canon PowerShot D30 Getting Started

Initial Preparations

Inserting the Battery Pack and Memory Card

Terminals
Waterproof
Seal
4
z z
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to "Specifications" in the
downloadable Camera User Guide.
1
Open the cover.
z z Slide the lock ( ) and open the cover
( ).
2
Insert the battery pack.
z z While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
z z
Be careful not to damage the waterproof
seal when inserting the battery pack.
z z To remove the battery pack, press the
battery lock in the direction of the arrow.
Battery
Lock
3
Check the card's write-protect
tab and insert the memory card.
z z Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
z z Insert the memory card facing as shown
until it clicks into the locked position.
z z
Be careful not to damage the waterproof
Label
seal when inserting the memory card.
z z To remove the memory card, push it in until
you feel a click, and then slowly release it.