Batl (Main) Board Removal - Sony KDL-40NX725 Service Manual

BATL (MAIN) BOARD REMOVAL

NOTES:
Refer to "Handling the FFC Connector" on page 3
The Sheet (BAT-L Metal Bottom) and Sheet (BAT-L Metal Side) are not included with the LCD Panel
and must be replaced when replacing the LCD Panel.
A Remove 6 screws and disconnect 6 connectors from BATL Board to detach from LCD Panel
(Refer to "Handling the FFC Connector" on page 3
B Release 2 clips and slide-out Bottom Bracket to detach from BATL Board
C Release 2 clips and slide-out Side Bracket to detach from BATL Board
KDL-40NX725/46NX725
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
to disconnect the LVDS Connector.
)
C
B
A
NOTE: The components identified by shading
and mark are critical for safety. Replace only
!
with part number specified.
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
201 A-1818-429-A BATL BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
202 4-265-819-11 BRACKET BOTTOM (BAT-L METAL)
203 4-265-817-01 BRACKET SIDE (BAT-L METAL)
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
205
204
203
202
201
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
204 4-256-432-11 SHEET (BAT-L METAL BOTTOM)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
205 4-256-431-11 SHEET (BAT-L METAL SIDE)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41 SCREW, (+PSW) (M3X6)
46