Sound Pressure Level; Sound Power Level; Vibration Level; Model 04052 - Toro 04052 Operator's Manual

Greensmaster 1000 and 1600

Hide thumbs Also See for 04052:

Operator's manual (36 pages)

Operator's manual (24 pages)

Operator's manual (32 pages)

Table Of Contents

Table of Contents

Enlarged version

Use of this product for purposes other than its intended use

could prove dangerous to user and bystanders.

• Know how to stop the engine quickly.

• Do not operate the machine while wearing tennis shoes

or sneakers.

• Wearing safety shoes and long pants is advisable and

required by some local ordinances and insurance

regulations.

• Handle gasoline carefully. Wipe up any spills.

• Check the safety interlock switches daily for proper

operation. If a switch should fail, replace the switch

before operating the machine. After every two years,

replace all four interlock switches in the safety system,

regardless if they are working properly or not.

• Using the machine demands attention. To prevent loss

of control:

– Do not operate close to sand traps, ditches, creeks,

or other hazards.

– Reduce speed when making sharp turns. Avoid

sudden stops and starts.

– When near or crossing roads, always yield the

right-of-way.

– Apply the service brakes when going downhill to

keep forward speed slow and to maintain control of

the machine.

• The grass basket must be in place during operation of

the reels for maximum safety. Shut the engine off

before emptying the basket.

• Do not touch the engine, muffler, or exhaust pipe while

the engine is running or soon after it has stopped

because these areas could be hot enough to cause burns.

• Stay clear of the rotating screen at the side of the engine

to prevent direct contact with your body or clothing.

• When a person or pet appears unexpectedly in or near

the mowing area, stop mowing. Careless operation,

combined with terrain angles, ricochets, or improperly

positioned guards can lead to thrown object injuries. Do

not resume mowing until the area is cleared.

Maintenance and Storage

• Check all fuel lines for tightness and wear on a regular

basis. Tighten or repair them as needed.

• If the engine must be running to perform a maintenance

adjustment, keep hands, feet, clothing, and any parts of

the body away from the cutting unit, attachments, and

any moving parts, especially the screen at the side of the

engine. Keep everyone away.

• To ensure safety and accuracy, have an Authorized Toro

Distributor check the maximum engine speed with a

tachometer. Maximum governed engine speed should be

3600 RPM.

• If major repairs are ever needed or if assistance is

desired, contact an Authorized Toro Distributor.

• Use only Toro-approved attachments and replacement

parts. The warranty may be voided if used with

unapproved attachments.