Table of Contents
Advertisement
How to dry correctly
Brief instructions
The headings numbered (, , ...)
show the operating sequence and can
be used as a brief guide to using your
dryer.
Preparing the laundry
Separate out the washed laundry and
sort it according to:
. . . the drying level required,
. . . the type of fibre or weave,
. . . size,
. . . the moisture content after spinning.
In this way an even drying result will be
achieved.
Make sure that objects e.g.
detergent dispensing balls have been
removed from the laundry. They
could melt, and cause damage to the
dryer or the laundry.
– Check seams and stitching to ensure
that padding and linings are intact.
– Fasten duvet covers and pillow cases
to prevent small items from being
rolled up inside them.
– Fasten hooks and eyes.
– Fasten any loose belts and ties.
– Sew in or remove underwiring from
bras.
Switching on the tumble dryer
The tumble dryer may be switched on
after loading, saving energy as the light
will not come on.
Press the button to switch the
dryer on.
16
Loading the tumble dryer
Press the Door button to open the
door.
Unfold the laundry and load loosely
into the drum.
Do not overload the drum. See the
"Programme chart" for
recommended loads for each
programme. Overloading can cause
unnecessary wear and tear to the
laundry and give a disappointing
drying result.
Before closing the door, make sure
the fluff filter is correctly positioned in
the door.
Check the laundry is right inside the
drum so that it cannot get trapped or
damaged when the door is shut.
Shut the door either with a gentle
swing, or lean against it and push it
shut.
Hide quick links:
Advertisement
Table of Contents
