Maintenance; Recommended Maintenance Schedule - Toro 03200 Reelmaster 3100-D Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1000 hours
Maintenance Procedure
Check Fan and Alternator Belt Tensions
Change Hydraulic Filter
Torque Wheel Lug Nuts
Change Engine Oil Filter
Check Engine RPM (idle and full throttle)
nspect Air Filter, Dust Cup, and Burp Valve
Lubricate All Grease Fittings
Change Engine Oil
Check Fan and Alternator Belt Tensions
Check Battery Fluid Level
Change Engine Oil Filter
Check Traction Belt
Change Air Filter
Change Hydraulic Filter
Torque Wheel Lug Nuts
Change Hydraulic Fluid
Change Fuel/Water Separator Filter
Change Fuel Pre Filter
Inspect Traction Cable Movement
Inspect Spider Coupling for Wear
Check Engine RPM (idle and full throttle)
Adjust valves
Replace Moving Hoses
Replace Safety Switches
Coolant System – Flush/Replace Fluid
Fuel Tank – Drain/Flush
Hydraulic Tank – Drain/Flush
36