Toro 22600 SGR-6 Operator's Manual page 8

Throttle Lever and Safety Bail
The throttle lever controls the engine speed. With the lever
released, in the disengaged position, the engine runs at idle.
This is also the starting position. When you pull the lever to
the handle, the engine speed increases, the centrifugal clutch
engages, and the cutting wheel rotates.
The safety bail controls the engine. Hold the safety bail
against the handle to deactivate the engine kill switch so that
the engine starts. Release the safety bail to shut off the engine.
1
1. Throttle lever
Parking Brake
The parking brake (Figure 6
from turning to secure the machine and for easy movement
of the machine from side to side when grinding a stump.
2
Figure 6
2. Safety bail
and Figure 7) holds the left wheel
1. Engaged brake
g014874
1. Disengaged brake
8
Figure 7
Figure 8
g014872
g014873