Table of Contents
Advertisement
2
3
1
G00381 1
1. 1.5 to 2.0 mm (0.060 to
0.080 inch)
2. Jam nut
4
Greasing the Blower
No Parts Required
Procedure
Before the Debris Blower is operated, it must be greased to
assure proper lubrication. Refer to the Lubrication section of
the manual. Failure to properly grease the unit will result in
premature failure of critical parts.
Figure 6
3. Adjustment nut
5
Installing the Front Weight
No Parts Required
Procedure
CAUTION
When an attachment is not installed on the
machine, loose weights must be removed. Never
operate the machine with no attachment installed
and front weights on the machine.
Use the following weight charts to determine the correct
amount of front weight required for your machine.
8
Advertisement
Table of Contents
