Setting The Network Camera Over The Lan - Panasonic A47 Quick Start Manual

Network Mini Dome Camera·Quick Operation Guide
3 Setting the Network Camera over the
LAN
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install the SADP or PCNVR software to search and change
the IP of network camera.
The following figure shows the cable connection of network
camera and PC:
Set the IP address of the camera for accessing via LAN.
Steps:
To set the IP address, please use the Advidia Camera Finder
Utility as described below:

To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet
with your PC. Then, install the Advidia Camera Finder Utility.
Figure 3-1 Wiring over LAN
26