Unpacking Your Washer - GE GFWR4805 Owner's Manual & Installation Instructions

Installation Instructions
UNPACKING THE WASHER
1. After removing the washer from its carton, remove all base
pGckaging,including the cardboard, styrofoam base Gnd
styrofoam tub support (inserted in center of bGse).
NOTE:If you are installing a pedestal, proceed to
the installation instructions that come with the pedestal.
2. Carefully move the washer to within 4 feet (122 cm)
of the final location.
.
.
Removethe following from the bGck side of the wGsher:
/4bolts
4 plastic spacers (including rubber grommets)
/4power cord retainers
Removethe shipping bolt. Insert plug into shipping
bolt hole.
NOTE:Failure to remove the shipping bolts can cause
the washer to become severely unbalanced.
Save all bolts for future use.
NOTE:If you must trGnsport the washer Gta IGterdate,
you must reinstall the shipping support hardware to prevent
shipping dGmGge.Keepthe hGrdwGrein the plGsticbGg
provided.
Scan this code
to watch a video
on Step 3.
20