Maintenance; Recommended Maintenance Schedule - Toro 07252TC Operator's Manual

Air-cooled gasoline utility vehicle
Hide thumbs Also See for 07252TC:
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service Interval
After First Use
Every 8 Hours
After First 20 Hours
Every 50 Hours
Every 100 Hours
Every 200 Hours
Every 400 Hours or Yearly
Every 800 Hours or Yearly
1
More often in dusty, dirty conditions
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Check the drive belt tension.
• Check the starter belt tension.
• Check the engine oil.
• Check the engine oil.
• Check the tire pressure.
• Change the engine oil.
• Check the front wheel toe-in at the proper
ride height.
• Check the battery fluid level.
• Check the battery cable connections.
• Change the engine oil.
• Lubricate all grease fittings.
• Clean the engine cooling areas.
• Inspect the air cleaner filter.
• Inspect the brake and parking brake.
• Inspect the condition and wear of the tires.
• Torque the wheel lug nuts.
• Check the front suspension adjustment toe-
in and ride height.
• Check the spark plug and replace it, if
necessary
Replace the air cleaner filter.
• Check the brake cable adjustments.
• Inspect the drive belt.
• Inspect and adjust the starter belt.
• Inspect the fuel lines.
• Replace the fuel filter.
• Change the transaxle oil.
• Drain/ flush the fuel tank.
22
1
1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman 1100

Table of Contents