Figure - Toro 38535 Operator's Manual

4. Shake the container to mix the gasoline and oil
thoroughly.
5. Slowly remove the cap and add the remaining amount
of gasoline.
Note: Do not mix gasoline and oil in the fuel tank. Oil
at room temperature mixes easier and more thoroughly
than cold oil. Oil below 32°F (0°C) requires additional
mixing
Filling the Fuel Tank
Fill the fuel tank with a fresh mixture of gasoline and oil
mixed at the proper ratio (Figure 13).

Figure 13

Starting the Engine
1. Turn the ignition key clockwise to the On position
(Figure 14).
Figure 14
2. Move the choke lever to the right (Figure 15).
Figure 15
3. Firmly push in the primer 2 times with your thumb,
holding the primer in for a second before releasing it
each time (Figure 16).
Figure 16
4. Pull the recoil starter (Figure 17).
Figure 17
5. With the engine running, move the choke lever to the
left slowly.
Stopping the Engine
To stop the engine, turn the ignition key counterclockwise
to the Off position (Figure 18).
Figure 18
Starting the Rotor Blades
To start the rotor blades, hold the control bar against the
handle (Figure 19).
Figure 19
8