Wireless Resource Control - D-Link DAP-2695 User Manual

Ac1750 dual band access point

User manual (90 pages)

Quick installation manual (88 pages)

Quick install manual (41 pages)

Table of Contents

Section 3 - Configuration

The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect the better wireless

connection in your environment.

Wireless band:

Select 2.4GHz or 5GHz.

Band Steering:

Use the drop-down menu to Enable the Band

Steering function. When the wireless clients

support both 2.4GHz and 5GHz and the 2.4GHz

signal is not strong enough, the device will use

5GHz as higher priority.

Band Steering Age:

Enter the time in seconds to specify the interval

of updating information.

Band Steering Diff:

The Band Steering difference value is equal to

the number of 5GHz wireless client connections

minus the number of 2.4GHz wireless client con-

nections. If the number of 5GHz wireless client

connections minus the number of 2.4GHz wire-

less client connections exceed this value, the

extra 5GHz wireless client connections will be

forced to connect to the 2.4GHz band and not

the 5GHz band.

Band Steering

Enter the maximum 5GHz connection attempts allowed before the 5GHz preferred function will be disabled for the wire-

Refuse Num:

less station connection.

Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users

Connection Limit:

accessing this device. The exact number is entered in the User Limit field below. This feature allows the user to share the

wireless network traffic and the client using multiple APs. If this function is enabled and when the number of users ex-

ceeds this value, or the network utilization of this AP exceeds the percentage that has been specified, the DAP-2695 will

not allow clients to associate with the AP.

D-Link DAP-2695 User Manual