Sony LMD-2451MT Instructions For Use Manual page 62

with a Single-link. HD15 (analog) and DVI-D (digital)
connectors are equipped for the PC input.
For more information, see "Available signal formats"
on page 92.
External sync input
The unit can be operated on the sync signal supplied
from an external sync generator.
Functions
APA (Auto Pixel Alignment) function
You can display pictures from the HD15 input connector
in the appropriate picture by simply pressing the APA
key.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically
released and the signals input to the input connector are
output to the output connector (loop-through).
Select color temperature and gamma mode
You can select the color temperature from among three
(HIGH, LOW, LOW2) settings and gamma mode from
between two settings (2.2, DICOM). You can also adjust
the color temperature to the appropriate setting in
"USER".
Two-display
Two kinds of input signals are put on the monitor.
For more information, see DISPLAY LAYOUT of
"MULTI DISPLAY SETTING" on page 82.
Color space feature
Equipped with Sony's proprietary technology "Chroma
TRU". By adjusting the color temperature/space settings
for each individual LCD panel, the monitors produce
consistent color balance, reducing unit-to-unit variations
in color reproduction. Either ITU-R BT.709 or OFF can
be selected for the color space settings.
Scan function
You can select the display from among "NORMAL",
"OVER", "FULL" and "NATIVE" except the HD15 and
DVI input signals.
Select language display
You can select your language for the display from seven
languages - English, Chinese, Japanese, Italian, Spanish,
German and French.
Power saving function
The monitor enters into power saving mode to reduce
the power consumption when no signal is input.
62
Features
Key inhibit function
You can inhibit the key to prevent missing an operation.
User memory function
You can save the 20 picture settings with the name. The
user memory data can be saved or loaded between the
monitor and the equipment (PC, etc.) connected in
serial remote mode.
Two kinds of ground terminals
Two kinds of ground terminals are built into the monitor
to equal the electric potential.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. You can
connect this unit to the monitor by the Ethernet
(10BASE-T/100BASE-TX) connection and controlled
remotely on the network.
For more information, see SERIAL REMOTE of
REMOTE menu on page 87.
Other
Optional stand
It is more convenient to install the monitor on a desk by
using the optional stand (SU-560).