Canon imageRUNNER 2545i Copying Manual page 32

• You cannot use the Automatic Paper Selection mode for copying when:
- You are copying in the Auto Zoom, Image Combination, or ID Card Copy mode.
- The Drawer Eligibility For APS/ADS setting is set to 'On' for only one paper source
for [Copy]. (See Chapter 3, "Configuring the Machine's Basic Settings," in the
Reference Guide.)
NOTE
• You can activate or deactivate the Automatic Paper Selection mode for each paper
drawer and the stack bypass. (See Chapter 3, "Configuring the Machine's Basic
Settings," in the Reference Guide.)
• You can use the stack bypass for the Automatic Paper Selection mode when:
- The paper is loaded in the stack bypass and the paper size and type are specified.
- The Drawer Eligibility For APS/ADS setting is set to 'On' for the stack bypass for
[Copy]. (See Chapter 3, "Configuring the Machine's Basic Settings," in the Reference
Guide.)
1
Place your originals.
2
3
Enter the desired copy quantity (from 1 to 999) using
- (numeric keys).
Press [Paper Select] and make
sure that <Auto> is selected.
If not, press (Reset) or press [Paper
Select] ➞ [Auto] ➞ [Done].
Selecting the Paper Size
2
2-3