Playing Back a Tape
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (I]] 113).
1. Set the camcorder to ~~~]l
mode.
Set the
~
switch to PLAY and the
TAPE/CARD switch to
§ ] .
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing out.
3. If the joystick guide does not
appear on screen, press (@) to
display it.
4. Push the joystick (
~
) towards ....
to rewind the tape.
5. Push the joystick (.. ) towards
~/II
to play back the tape.
Push (.. ) again to pause the playback.
6. Push the joystick (T) towards.
to stop the playback.
.~
~m
W
J oystick
CD
30
_
0 To use the viewfinder, close the LCD panel.
•
0 About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.