Table of Contents
Advertisement
Preparing the worktop
Make the worktop cut-out as shown
in "Building-in dimensions". Observe
the safety distances (see "Safety dis‐
tances").
Solid wood, tiled and glass worktops:
Fix the wooden frame 7 mm below
the top edge of the worktop (see dia‐
gram).
Connecting the mains connec‐
tion cable to the appliance
The mains connection cable must
only be connected by a suitably
qualified and competent person.
Follow the instructions in the wiring
diagram (see "Electrical connection -
Wiring diagram").
Installing the hob
Feed the mains connection cable
down through the cut-out.
Centre the hob in the cut-out.
Connect the hob to the mains.
Check that the hob works.
Seal the remaining gap with a sili‐
cone sealant that is heat-resistant to
at least 160°C.
For natural stone worktops and natu‐
ral stone tiles, only use silicone seal‐
ant that is specially formulated for
natural stone, and observe the seal‐
ant manufacturer's instructions.
Installation
53
Advertisement
Table of Contents
