Introduction - Toro 02750 Operator's Manual

1.20

Introduction

The T4240 mower is a diesel engine powered self propelled machine with hydraulic systems for ground drive,
cutterhead drive and steering. The machine operates in four wheel drive, at all times, however, the transmission
system can be operated in both 'work' and 'transport' modes. These modes can be selected by the operator. In
order to optimise machine performance and reduce transmission system wear it is advisable to operate the
machine in the appropriate mode. 'Work' signifies cutting operations and 'transport' signifies travelling between
work sites. A differential lock function may be selected.
The T4240 mower is a precision built machine designed solely for cutting grass and similar low lying ground
vegetation within the limitations stated in this manual. Use in any other way is considered as contrary to the
intended use. Compliance with and strict adherence to the conditions of operation, service and repair as specified
in this Operators Manual also constitute essential elements of the intended use. The way in which this machine is
operated and maintained will have a profound effect on its performance and reliability.
This manual contains advice on the T4240 mower which should be operated, serviced and repaired only by per-
sons who are familiar with its particular characteristics and who are acquainted with the relevant safety proce-
dures.
The safety precautions listed herein and all other generally recognised regulations on safety and all road traffic
regulations must be observed at all times.
Any unauthorised modifications carried out to this machine may relieve TORO of liability for any resulting
damage or injury.
In the pursuit of continuous product development TORO reserve the right to alter specifications without notice.
Cutterhead Variants: The T4240 can be fitted with a range of cutterhead configurations and optional extras:
Cutterhead Cylinder diameter
MK3 Cutterhead
Optional Extras:
Beacon Kit - Amber flashing warning light.
Lighting Kit - Complies with EC traffic regulations.
R.O.P.S. Cab - Full weather protection and roll - over protection (Available in standard, deluxe and super deluxe).
Cab Tilt Kit - Enables the cab to be tilted.
Deluxe Seat Kit - Vinyl covering, includes air suspension unit, head rest, lumbar support and extended arm rests.
Note: with a ROPS cab fitted the stability angle will decrease, due to the higher centre of gravity of the
machine.
When fitting optional extra kits to the mower be sure to fix the serial number decal supplied with the kit to the
chassis LH side. This will help the spare parts department to supply the correct spare parts throughout the service
life of the mower.
Left and right: Throughout this manual the terms 'left' and 'right' refer to the machine when looking in the
direction of forward travel.
INTRODUCTION
Number of blades
200mm (8˝)
254mm (10˝)
Fixed Heads
4, 6, 8, 10 Yes
4, 6 Yes
1.20
Floating Heads with
smooth or grooved front
rollers
Yes
No