Digital Electronic Control-Alert Indicator; Control Lever; Free Throttle Switch - Yamaha F225F Owner's Manual

Components
1. Digital electronic control-active indicator
EMU34985
Digital electronic control-alert
indicator
The digital electronic control-alert indicator
lights when trouble occurs in the connection
between the digital electronic control and
outboard motor. Consult your Yamaha deal-
er for details.

1. Digital electronic control-alert indicator

25
EMU34993

Control lever

Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the le-
ver back from neutral engages reverse. The
engine will continue to run at idle until the le-
1
ver is moved 22.5 (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
Digital electronic control for twin type has the
ZMU05890
function of automatically synchronizing the
engine speeds of both engines of the port
and starboard sides.
1. Neutral " "
2. Forward " "
3. Reverse " "
4. Shift
5. Fully closed
1
6. Throttle
ZMU05889 7. Fully open
EMU35003

Free throttle switch

In neutral, keep this switch pressed, move
the control lever forward, and release the
switch after the digital electronic control-ac-
tive indicator starts blinking. While the indica-
tor blinks, you can open or close the throttle.
This can also be done when the control lever
1
is set in reverse.
ZMU05891
N
F
1
4
2
6
5
7
R
4
3
6
5
7
ZMU05878