1. Tilt lock lever (Release / tilt-up)
To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in
the release position.
EMU26322
Tilt support knob
To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.
ECM00661
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.
EMU26334
Tilt support bar
The tilt support bar keeps the outboard motor
in the tilted up position.
1
ZMU05631
ECM01661
NOTICE
Do not use the tilt support bar when
trailering the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the
tilt position.
EMU26362
Power tilt unit
This unit tilts the outboard motor up and
down and is controlled with the power tilt
switch.
ECM00631
ZMU02812
NOTICE
Do not step on or exert pressure on the
power tilt motor. The power tilt unit could
be damaged as a result.
Components
ZMU05528
33