Table of Contents
Advertisement
Citrus Juicer
The citrus juicer if supplied, can be used to juice citrus fruits
including oranges, limes, lemons and grapefruits for drinks and for
use in puddings, cakes etc.
1.
With the processor bowl in position, attach the citrus juice
strainer by placing over the bowl and turning clockwise until
the fin on the strainer aligns with the mark on the processor
body (fig.16).
2.
Place the reamer onto the drive shaft turning until it drops all
the way down (fig.17).
3.
Cut the citrus fruit in half. Switch onto Speed 1, hold fruit
firmly over the reamer to extract all the juice.
Liquidiser
Use for blending soups, drinks, pâtés, mayonnaise and for chopping nuts and making crumbs from bread and biscuits.
18
Hints:-
•
Cut dry ingredients into cubes, e.g. bread for breadcrumbs and feed them through the filler cap onto revolving blades.
•
Recipes containing liquid can be placed directly into the liquidiser
•
Best results are obtained using a high speed.
•
When making mayonnaise, place all the ingredients with the exception of the oil into the liquidiser. Remove the filler cap and with the
motor running gradually add the oil in a steady stream.
•
Never exceed the maximum capacity on the liquidiser of 1 litre/ 1
IMPORTANT
•
For safety reasons we do not recommend the blending of very hot liquids
•
Do not place dry ingredients into the liquidiser before switching on
•
Various spices such as cloves, dill and cumin seeds have an adverse effect upon the liquidiser plastic and should not be processed.
•
The liquidiser runs at such high speeds that all foods are processed within one minute.
•
Prolonged running or repeated use should be avoided especially when processing dry ingredients or small quantities.
•
The liquidiser is not suitable as a storage container therefore ingredients should not be left to stand in the goblet before processing and
should be removed immediately afterwards.
•
When switching off, wait until the blades have stopped revolving before removing the liquidiser.
16
Filler cap
Lid
Goblet and base combined
3
⁄
pints.
4
17
1.
Remove the outlet cover from the food
processor by lifting off.
2.
Fit the lid and filler cap on the goblet (fig.18)
by placing into position, and twisting both
clockwise to lock.
3.
Place the liquidiser on the outlet, engaging
the lugs in the base in the slots provided.
Turn clockwise until it locks into position.
(fig. 19)
Note:- When using the liquidiser outlet ensure that
there are are no tools in the processor bowl. The
liquidiser will only operate with the processor bowl
and lid in position.
19
9
Hide quick links:
Advertisement
Table of Contents
