D-Link DIB-360 User Manual page 17

Section 3 - Setup
4. When you finish, click on OK to save the configuration.
How to check for available firmware and update
1. Focus on Firmware update again and press CENTER on the remote control to start checking for the latest firmware on the FTP server.
Note: If your firmware is currently up to date, it will display a message to notify you that there is currently no new firmware for your device.
2. If "New software is available for your device. Do you want to update now?" appears on the screen, click OK to start downloading the available
firmware. Click Cancel to quit the dialog.
3. While the firmware update is running, please note that:
• DO NOT power off your device or disconnect it from the AC power outlet
• DO NOT remove the SD card from the SD card slot
• Please make sure the network connection is active
Otherwise, the firmware update may not succeed and may cause your device to be unresponsive or require repair.
4. After downloading is successful, click OK to restart your device and start updating the firmware.
5. When "updating... please don't turn off" appears on the startup screen, installation of the update has begun.
6. After the firmware update is finished and the DIB-360 powers on successfully, the upgrade is completed. You can check the firmware version in
the Firmware update screen.
D-Link DIB-360 User Manual 14