Transmission Oil - Yamaha GRIZZLY 125 YFM125GD Owner's Manual

Table of Contents

Advertisement

9. Start the engine, and then let it idle for several
minutes while checking it for oil leakage. If oil
is leaking, immediately turn the engine off and
check for the cause.
10. Turn the engine off, wait at least ten minutes,
and then check the oil level and correct it if
necessary.
EBU27026

Transmission oil

The transmission oil level should be checked be-
fore each ride. In addition, the transmission oil
must be changed at the intervals specified in the
periodic maintenance and lubrication chart.
To check the transmission oil level
1. Place the ATV on a level surface.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Wait a few minutes until the oil settles, and
then loosen the transmission oil check screw
located at the right side of the crankcase until
oil flows out.
4 3
2
1
1. Transmission oil check screw
2. Gasket
3. Correct oil level
4. Transmission oil
4. If no oil flows out, remove the transmission oil
filler bolt and its gasket.
8-14
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents