Operation; Starting The Engine - Yamaha GRIZZLY YFM70GPXH Owner's Manual

EBU19882
EBU19902
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
EWB00632
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU30502

Starting the engine

This model is equipped with an ignition circuit cut-
off system. To enable starting one of the following
conditions must be met:
 The drive select lever is in the neutral or park po-
sition.
 The rear brake lever or brake pedal is applied.

OPERATION

TIP
Under normal operating conditions, it is recom-
mended to shift into neutral or park and apply the
rear brake when starting the engine.
ECB00151
NOTICE
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
To start the engine
1. Turn the key to "
switch to "
 The coolant temperature warning light and
the engine trouble warning light should
come on for a few seconds, then go off.
 The electric power steering warning light
should come on and stay on until the en-
gine is started.
6-1
" (on) and the engine stop
" (run).
6