Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF6400SE User Manual

Specifying the Cutting Method for Rolls

2
Select the Main pane and click
dia Type.
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
tween Pages and
Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).")
P.259
➔

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit fol-
lowing printer driver settings.
Select this to move the cutter by key operation and
Eject (when
the paper cut paper. Although there are cases with Automat-
surface is ic in which the paper falls and the paper surface is
350 being scratched, you can avoid damaging the paper with
this method since you can cut by holding the paper
scratched /
with your hand so that the paper does not fall when
to wait for
cutting. Also, since you can cut while visually con-
ink to dry)
firming the drying of the ink, you can avoid ejecting
paper before the ink has dried.
To cut the roll with the Cutter Unit, press the Cut
button.
C
Settings in
C
D B
Between Scans in
Cutting Method
A
Me-
Be-
Drying
Printer Setting
Media Automatic
Menu >
Paper De-
Eject
tails >
(Various
Types of
Paper) >
Cutting
Mode
iPF6400SE
Driver Setting
Auto Cut Yes
(See "Cut-
ting Roll
Yes
Paper After
Print-
ing.")
P.135
➔
User's Guide