Brother MFC-8510DN Quick Setup Manual page 5

4
Connect the power cord
and telephone line
Important
DO NOT connect the interface cable
yet.
a
Connect the AC power cord to the machine and
then plug it into an electrical socket.
b
Turn the machine's power switch on.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
Important
The telephone line cord MUST be connected to
the socket on the machine marked LINE.
(Example for U.K.)
WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
electrical socket, you can protect yourself
from potentially hazardous electrical
conditions on the telephone network by
keeping the power cord connected to your
machine when you connect it to a telephone
line. Similarly, you can protect yourself when
you want to move your machine by
disconnecting the telephone line first and then
the power cord.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
a Extension telephone
b External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
a Extension telephone answering machine
(not supported)
b External telephone answering machine
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 6. For
additional details, see Connecting an
external TAD in the Basic User's Guide.
(Example for U.K.)
(Example for U.K.)
5