Basic Working Techniques - Husqvarna HA110 Operator's Manual

• Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
• Store the machine out of reach of children.
• Use only original spare parts for repairs.

Basic working techniques

• Work with a swinging action from the bottom upwards
when trimming sides.
• Adjust the throttle setting to suit the load.
• When trimming a hedge the engine should always face
away from the hedge.
• Hold the machine as close to your body as possible to get
the best balance.
• Make sure that the tip does not touch the ground.
• Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
Changing the hedge trimmer angle
(HA 110)
1 Undo the knob.
WORKING TECHNIQUES
2 Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
3 Tighten the knob.
(HA 850)
• Undo the knob.
• Adjust the angle with the help of the handle on the cutting
unit.
• Tighten the knob.
WARNING! Do not hold the cutting head
!
when you adjust the angle. The blades are
sharp and you could easily cut yourself.
– 9
English