Chapter 4
4.3.2 Moving the carriage manually
Move the carriage as required during disassembly/reassembly to prevent the carriage form contacting the par
to be removed.
The carriage does not move when capped. When uncapping moving the carriage, refer to the procedures
DISASSEMBLY/REASSEMBLY>Points to Note on Disassembly and Reassembly>Opening the Cap/Movin
the Wiper Unit.
4.3.3 Units requiring draining of ink
When disassembling the following units of the ink passage, drain ink complateil to prevent it from leaking. Fo
how to drain ink, refer to DISASSEMBLY/REASSEMBLY > Pointe to Note on Disassembly and Reassemb
> Draining the Ink.
[1] Carriage unit
Refer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Carriage Uni
[2] Ink tank unit
Refer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Ink Tank Uni
[1]
[2]
F-4-3
4-2
fineline6