Rack Mounting - Sony MB-X6 Operating Instructions Manual

Press and hold down the CH button on the tuner unit in
the slot A.
The tuner unit in the slot A searches for available
channels in the selected group, and available channels
in the group are so assigned to all tuner units
automatically that all the tuner units use different
channels.
After automatic setting, you can adjust the groups and
channels of individual tuner units.
Notes
• Do not use group 00.
• When there are unavailable channels due to extraneous
radio wave and the channel could not be selected on
some tuner units, "NO CH" appears on the display of
those tuner units. If this happens, select the channel
group with no interference from extraneous radio wave,
and repeat the procedure above.
16

Rack Mounting

Rack Mounting
1
Remove the pins inside the feet at the bottom of the
MB-X6 using a small screwdriver or similar tool.
Bottom of the
MB-X6
2
Mount the MB-X6 on the rack using screws that are at
least 12 mm (1/2 inches) long and that match the
diameter of the screw holes on the rack.
MB-X6
Foot
Pin
Rack
Screws