Technical Data - Husqvarna 128R Operator's Manual

Technical data

Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW
Catalytic converter muffler
Speed- -regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions
(see Note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Noise levels
(see Note 2)
Equivalent sound pressure level at the operators' ear,
measured according to EN/ISO 11806 and ISO 22868,
dB(A)
Equipped with grass blade (original)
Equipped with trimmer head (original)
Vibration levels
(see Note 3)
Equivalent vibration levels (a
according to EN ISO 11806 and ISO 22867, m/s
Equipped with grass blade (original), left/right
Equipped with trimmer head (original), left/right
Note 1: Noise emissions in the environment measured as sound power (L
ty with EC directive 2000/14/EC. Reported sound power level for the machine has been
measured with the original cutting attachment that gives the highest level. The difference
between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different ma-
chines of the same model according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical
statistical dispersion (standard deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
Model 128R (M10 LH arbor shaft thread) - - Centre hole in blades/cutters, ∅ 25,4 mm
Approved accessories Type
Grass blade/grass cutter Grass 255- -4 1 inch
(∅ 250 4- -teeth)
Trimmer head T25 (∅ 2,4 - - 2,7 mm line) 537 33 83- -06 / 545 03 09- -01
Plastic blades Tri- -cut 300 mm (separate 531 00 38- -11 / 545 03 09- -01
blades have part number
531 00 77- -15)
Support cup Fixed
115302126 Rev. 2 7/15/10
TECHNICAL DATA
dB(A)
WA
) at handles, measured
hv,eq
2
2
.
Cutting attachment /guard, part. no.
503 93 42- -02 / 545 03 09- -01
- -
128R
28
35
28,7
2800- -3200
11000
8000
0,8
Yes
Yes
Champion RCJ- -8Y
0,6
0,4
4,8
109
114
100
100
3,5/3,1
7,7/7,4
) in conformi-
WA
English--- 24