Setting Up E-Mail/I-Fax Function - Canon imageRUNNER 2545i System Settings Manual

Setting up E-Mail/I-Fax Function

To set up the Scan to E-mail and I-fax functions, follow the procedure below.
IMPORTANT
• To send e-mails or I-faxes with the imageRUNNER 2545/2535/2530/2525/2520, the
Send function must be activated with the optional Color Send Kit-Y1.
• Changes made to E-mail/I-Fax settings become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
3
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, "Before
You Start Using the Machine," in the User's Guide.
• To enable SSL communications for sending/receiving e-mails and I-faxes, specify the
SSL settings described in this section. Also, an SSL key pair must be generated and
set as the default key. (See "Generating a Key Pair for SSL Communications," on
p. 3-21, and "Setting the Default Key for SSL Communications," on p. 3-35.)
NOTE
You can set the machine to verify the SSL server certificates for POP/SMTP. The
settings are available only on the Remote UI. See Chapter 4, "Customizing Settings,"
in the Remote UI Guide.
1
3-52

Setting up E-Mail/I-Fax Function

Press (Additional Functions)
➞ [System Settings] ➞ [Network
Settings].