Yamaha WR450F Owner's Service Manual page 204

6. Install:
• Speed sensor lead "1"
• Plate 2 "2"
(to the right front fork protector)
Plate 2 screw
0.5 Nm (0.05 m·kgf, 0.36 ft·lbf)
TIP
Install the plate 2 in the direction as shown.
1
2
7. Install:
• Protector "1"
• Bolt (protector) "2"
Bolt (protector)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1
8. Adjust:
• Rebound damping force
TIP
Turn in the damping adjuster "1" finger-tight
and then turn out to the originally set position.
1
9. Adjust:
TIP
Turn in the damping adjuster "1" finger-tight
and then turn out to the originally set position.
2
1
2
5-52
• Compression damping force
1
FRONT FORK