Initializ Ing Bluetooth Drivers - Bosch KTS 530 Operator Instructions Manual

2.8.3

Initializ ing Bluetooth drivers

If the Bluetooth connection is faulty or absent or alter-
native remedial measures failed (see Chapter 2.8.1),
the Bluetooth drivers must be initialized.
Proceed as follows:
Double-click on the Bluetooth manager icon .
1.
Bluetooth settings will open
If the "Add New Connection Wiz ard" dialog win-
dow opens, continue from Item 4.
Check whether a KTS module appears under the
2 .
entered Bluetooth devices.
If no KTS module is entered: select < New connec-
3 .
tion> and then proceed from Item
or
3 . If a KTS module is entered: delete KTS module.
If KTS module is connected
"Bluetooth > > Disconnect" menu option.
Select "Bluetooth > > Delete".
Select < New connection>.
"Add new Connection Wiz ard" dialog window will
open.
Bosch Diagnostics
Description of unit | KTS 530 / KTS 540 / KTS 570 | 21
4 . Select Express mode option.
Select < Next>.
5 .
6 . Select <
Confirm prompt
7 .
close the Assistant?
: Select In the "Bluetooth settings" dialogue window, select
8 .
"Bluetooth > > Terminate".
Bluetooth drivers are now initialized.
Bluetooth devices will be searched and displayed.
Cancel
>.
Are you sure you want to
with < Y es>.
1 689 979 987
en
| 2006-09-29
http://www.obd2be.com/