A: Fully Automatic Flash Photography - Canon 600EXII-RT Instruction Manual

a: Fully Automatic Flash Photography

When you set the camera's shooting mode to <d> (Program AE) or
fully automatic mode, you can shoot in E-TTL II/E-TTL fully automatic
flash mode.
Effective flash range
Flash exposure
confirmation lamp
If the flash exposure confirmation lamp does not light or if the subject is
dark (underexposed) when you check the shot image, move closer to the
subject and shoot again. You can also increase the ISO speed when
using a digital camera.
"Fully automatic mode" refers to <A>, <1>, and <C> shooting
modes.
Even when attached to a camera that supports the E-TTL II autoflash
system, <a> is displayed on the LCD panel.
24
Set the flash mode to <a>.
1
Press the <E> button.
Turn <9> to select <Q>, then
press <8>.
Check that <M> or
<x> is not displayed.
Focus on the subject.
2
Press the shutter button halfway to
focus.
The shutter speed and aperture are
displayed in the viewfinder.
Check that <Q> is lit in the viewfinder.
Take the picture.
3
Check that the subject is in the
effective flash range.
When you press the shutter button
completely, the flash will fire and the
picture will be taken.
If the standard flash exposure is
obtained, the flash exposure
confirmation lamp lights for approx. 3
sec.