Table of Contents
Advertisement
Configure the network of computer
When you use the monitor through the network, the IP address of the monitor
must be the same IP network number of the existing network. Also it is required to
use the same IP network number of the computer to set up the monitor. In the network
included with the gateway (router), it must be used with the IP network number specified
by the gateway (router).
Configure the computer's network by following steps:
Windows 98/Me
This example explains how to set the following network
address.
IP Address
Subnet Mask
Gateway Address : 192.168.100.1
1
Select the Control Panel menu from [Start] -
[Setting] menu.
2
Double click the Network icon on the control panel
window.
3
Select the TCP/IP*
Component" column on the "Network configuration"
tab on the "Network" dialog window, and then press
the Properties button.
4
Click IP Address tab, and then select the Specified
IP address. Enter the IP Address*
Mask.
5
Click the Gateway tab and enter the Gateway
Address then press the Add button. Please make
sure that the entered gateway address appears on
the "Installed Gateway column.
This setting is not needed if the network does not pro-
vide the gateway (router).
6
Click the OK button, the setting window will be
closed and restart the computer.
: 192.168.0.5
: 255.255.255.0
item on the "Current Network
1
2
Configure the network of computer
and Subnet
17
Advertisement
Table of Contents
