1-2-3. Split number setting method
Pattern 1
Pattern 2
Pattern 3
4964Q
[Sewing operation screen]
2nd step
1.
Touch the "Program No." △ or ▽ key (1) to select the program number which includes the split data.
・
The "Program No." value (2) will flash.
2.
Depress the foot switch to the 2nd step.
(
If using a two-pedal foot switch, lower the work clamp before depressing the start switch.
・
The feed mechanism will move to the home position and the program number will be accepted.
・
The "Program No." value (2) will stop flashing and illuminate steadily.
3.
Use the "Split No." △ or ▽ key (3) to select the split number.
The setting for memory switch No. 403 lets you select the split mode.
[Continuous split]
Memory switch No. 403 = 0 (Split mode is always enabled)
・
Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two sections of split
data).
[Independent split]
Memory switch No. 403 = 1
・
The pattern for the displayed split number is sewn independently.
If split data (data that causes sewing to pause) exists within a single program, the
numbers that are used to specify the patterns that are separated by split data are
called split numbers.
Pattern 1: Split No. 1
Pattern 2: Split No. 2
Pattern 3: Split No. 3
(2)
(1)
4441Q
BAS H series
1. USING THE LCD PANEL (BASIC OPERATIONS)
(3)
Work clamp switch (2-step)
Start switch
4923Q
)
8