Specifying The Cutting Method For Rolls - Canon ipf6350 User Manual

3.
In the Paper Detailed Settings dialog box displayed next, select the desired settings values in
D
and Between Scans in
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
Note
• By factory default, Drying Time is deactivated ( Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Mode
to Eject in the printer menu.
(See "Specifying the Cutting Method for Rolls.")

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Cutting Method
Automat- The roll is automatically cut by the Cutter Unit
ic following printer driver settings.
Choose this setting if you prefer not to have
Eject
documents dropped immediately after printing,
→P.792
as when waiting for ink to dry.
To cut the roll with the Cutter Unit, press the
Cut button.
Choose this setting when using media that can-
Man-
ual not be cut using the Cutter Unit.
Use scissors to cut each document from the
→P.793
roll after printing. For continuous printing (if
you will cut each page later), select Auto Cut
> Yes or select Print Cut Guideline.
iPF6350
B
Drying Time, and then click OK.
Handling Paper
→P.492
→P.791
Printer Setting
Media Automat-
Menu > ic
Paper
Eject
Details >
(Various
Types of
Paper) >
Cutting
Manual
Mode
Specifying the Cutting Method for Rolls
> Handling rolls
C
Between Pages
Driver Setting
Auto Cut Yes
(See
"Cutting
Yes
Roll Pa-
per After
Print-
ing.")
→P.190
No Yes
Print Cut
Guide-
line
>
7
791