Table of Contents
Advertisement
Operating Instructions
Camera Type
IP address
Camera Name
Description
Resolution
Image Quality
Capture Type
Recording File
Format
Recording
Timer
Operation
34
Instructions for the data fields
Select the Network Camera type (with Pan/Tilt feature, without Pan/
Tilt feature or with zooming feature).
Enter the IP address of Network Camera.
Enter "IP address (or domain name):Port number".
(When port number is 80 [default], you do not need to enter port
number.)
•
Enter the alphanumeric characters.
Enter Camera Name.
•
Maximum 250 characters including a path name of a folder
•
[\], [/], [:], [.], [;], [*], [?], ["], [<],[>] and [|] are not available.
Enter the information of Network Camera.
•
Maximum 128 characters
Select 640 x 480, 320 x 240 (default) or 160 x 120.
Select Favor Motion, Standard (default) or Favor Clarity.
Select Motion Image or Still Image. Intervals should be set over
0.5 seconds.
•
You may not monitor or record at the specified intervals
depending on the recording situations.
Select a recording file format.
•
JPG creates JPEG files. The number of continuous recorded
images are limited. MJP is recommended when recording a
motion image or still images at short intervals.
•
MJP creates an MJP file. MJP puts continuous JPEG files
together every hour.
Select Off, On or Motion Detect.
Set the date of recording. Select the date and a day of the week.
If the setting time passes over midnight, check the day of start time.
•
Select [On] or [Motion Detect] for recording type. Images are
recorded when detecting motions, when selecting [Motion
Detect].
Advertisement
Table of Contents
Troubleshooting
