Simple Settings Function - Panasonic CZ-RTC4 Service Manual

4. Simple Settings Function

• This allows the filter lifetime, operating mode priority change, central control address, and other settings to be
made for an individual or group-control indoor unit to which the remote controller used for simple settings is
connected.
When simple settings mode is engaged, operation stops at the individual or group-control indoor unit to which
the remote controller for simple settings is connected.
1 Press and hold the
simultaneously for 4 seconds or longer.
1
2 " ", unit No. "
of group control), item code "
data " " are displayed blinking on the remote
controller LCD display (Fig. 4). At this time, the
indoor unit fan (or all indoor unit fans in the case of
group control) begins operating.
3 If group control is in effect, press the
select the address (unit No.) of the indoor unit to set.
At this time, the fan at the indoor unit begins operating.
*If unit No. "
will be made for all indoor units.
4 Press the temperature setting
select the item code to change.
5 Press the timer time
desired setting data.
*For item codes and setting data, refer to the
following page.
6 Press the
and remains lit, and setting is completed.)
7 Press the
controller display.
and buttons
" (or " " in the case
," and settings
" is displayed, the same setting
/ buttons to
/ buttons to select the
button. (The display stops blinking
button to return to normal remote
4
5
button and
1 - 6
Optional Controller
Remote Controller Functions
°
°
A
CZ-RTC4
7 1 6
Fig. 4
2
3