1-15. FRONT COVER ASSEMBLY REMOVAL
1-15-1.REPLACING THE LAMP
For detailed instructions on replacing the lamp, see
Page 16 of the Operating Instructions manual.
1-16. HM BOARD AND H2 BOARD REMOVAL
Disconnect one connector
(CN4502)
Two screws
(+BVTP 3X12 TYPE2)
KDF-55WF655/60WF655
Three screws
(+BVTP 3X12 TYPE2)
2
Gently pull the
Front cover assembly forward.
Note the area of the 3 magnets
holding the cover
One screw
3
(+BVTP 3x12)
2
1
H2 board
1 Two ornamental screws
Cable Cover
3
One screw
(+BVTP 3X12)
6
Disconnect USB cable
HM board
5
Pull back on the clip
while lifting the HM board up
4
Two screws
(+BVTP 3X12 TYPE2)
KDF-55WF655/60WF655
6
Disconnect one connector
(CN7301)
20