Operating Range; Projector And Remote Control Buttons - Lenovo C500 User Manual

Hide thumbs Also See for C500:
Table of Contents

Advertisement

3. Replace the cover, as shown.
Note:
v Only use AAA alkaline batteries.
v Dispose of used batteries according to local government ordinance regulations.
v Remove the batteries when not using the remote for prolonged periods.

Operating range

This remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote to the sides or the rear of the
projector, the remote will function within a maximum radius of 10m (33ft) and 30° above or below the
projector level. If the projector does not respond to the remote control, move closer.
Note: You can also point the remote at the projected image.

Projector and remote control buttons

The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control. The figure below shows the corresponding buttons
on the remote control and on the projector for OSD menu operation. Some buttons have two functions.
For example, item 3/5 on the projector functions both as the keystone button and as the up cursor key in
OSD menus.
Downloaded From projector-manual.com Lenovo Manuals
Chapter 4. Using the projector features
4-3

Advertisement

Table of Contents
loading

Table of Contents