Enjoying Sound With Dolby Pro Logic; To Playback A Dolby Surround Source With Dolby Pro Logic - Panasonic SC-AK62 Operating Instructions Manual

1
SC-AK77
SC-AK66
SC-AK62
SC-AK77
SC-AK66
SC-AK62
SC-AK77
SC-AK66
SC-AK62
Enjoying sound with DOLBY PRO
LOGIC (DOLBY PRO LOGIC)
1
To playback a Dolby Surround source with
Dolby Pro Logic
Press [p PL].
The button lights.
Playback a Dolby Surround source.
To turn off DOLBY PRO LOGIC
Press [p PL].
The button light goes out.
Manufactured under license from Dolby Laboratories.
"Dolby", the double-D symbol and "Pro Logic" are trademarks
of Dolby Laboratories.
To adjust the volume of each speaker
Preparation: Press [p PL] to turn the light on.
Sit in the normal listening position and make the adjustments with the
remote control.
1 Press [TEST].
A test signal is output.
The speaker outputting the test signal is displayed while the test is
running.
Lch: Front speaker (Left)
Cch: Center speaker
Rch: Front speaker (Right)
Sch: Surround speakers
2 Press [VOLUME (– or +)].
Set the volume to the normal listening level.
The following steps are for setting the output level of the front speakers
and the other speakers to the same listening level.
3 Press [CH SELECT].
Select the speaker channel to be adjusted.
4 Press [CH LEVEL (– or +)].
Adjust the output level
+ : Increases the output level
– : Decreases the output level
Repeat steps 3 and 4 to adjust the level accordingly.
To stop the test signal
Press [TEST] again.
31
RQT5769