JVC DLA-SH4KNL Instructions Manual page 25

Setting (Changing) the IP address of this
projector
1
Launch the Internet Explorer on the
computer
2
Check if the proxy has been set in the ALAN
SettingB of the Internet Explorer
A Click AToolsB and select AInternet OptionsB
B Click AConnectionsB and click ALAN SettingB
C Check if the check for AUse a proxy server for your
LANB has been selected
● If the check mark has been selected, deselect it.
Deselect the check
3
Check if the AActive scriptingB of the Internet
Explorer is disabled
A Click AToolsB and select AInternet OptionsB
B Click in the order of ASecurityB
ASitesB
C Deselect the check in ARequired server verification
(https:) for all sites in this zoneB
D Enter Ahttp://192.168.0.2B under AAdd this web site
to the zoneB and click AAddB
E Click AOKB
F Select ATrusted SitesB and click ACustom LevelB
G Check if the check for AActive scriptingB under
AScriptingB has been selected
● If the check mark has been deselected, select it.
Select AEnableB
ATrusted SitesB
25