Initial System Setup - LG LAB550H Service Manual

When you turn on the unit for the fi rst time, the initial setup wizard appears on the screen. Set the display language
and network settings on the initial setup wizard.
1. Press (POWER).
The initial setup wizard appears on the screen.
2. Use /// to select a display language and
press ENTER ().
3. After checking the Terms of Service, select
[Agree] to use the Premium Service and SW
Updates.
Read and prepare the preparations for the
network settings and then press ENTER ()
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be fi nished.
4. All available networks are displayed on the screen.
Use / to select [Wired Network] or desired
SSID of wireless network and press ENTER ().
If you have security on your access point, you
need to input the security code as necessary.

INITIAL SYSTEM SETUP

1-5
5. Use /// to select the IP mode between
[Dynamic] and [Static]. Normally, select
[Dynamic] to allocate an IP address automatically.
6. Select [Next] and press ENTER () to apply
network settings.
Network connection status is displayed on the
screen.
For details on network settings, refer to
O/M "Connecting to your Home Network".
7. Select [Next] and press ENTER ().
8. You can listen to TV sound through this unit's
speaker automatically when TV is turned on.
Press  to move and press / to select [On]
or [Off ]. Select [Next] and press ENTER ().