Table of Contents
Advertisement
Touch
OK
immediately after setting
the temperature to confirm your entry.
Or wait approx. 8 seconds after the
sensors were last touched. The tem-
perature will then be adopted auto-
matically.
Tip: The newly set temperature can also
be confirmed and adopted by closing
the appliance door.
The temperature display will then
change to the current temperature in
the appliance.
Temperature range
– The temperature in the refrigerator
section can be adjusted from 1 °C to
9 °C.
– The temperature in the freezer sec-
tion can be adjusted from -15 °C to
-26 °C.
Tip: If you have adjusted the temperat-
ure, wait for approx. 6 hours if the ap-
pliance is not very full and for approx.
24 hours if the appliance is full before
checking the temperature display, as it
will take this long for the appliance to
give an accurate reading.
If, after this time, the temperature is
still too high or too low, you will need
to adjust it again.
The correct temperature
27
Hide quick links:
Advertisement
Table of Contents
