Mitsubishi Electric CC-Link User Manual page 15

2 NAMES AND SETTINGS FOR EACH PART
No. Item
2) Transmission speed setting
3) Station number setting switches
4) External I/F pin header
2 - 2
Setting value
4
0 OFF
1 OFF
2 OFF
3 OFF
4 ON
Be sure to set the transmission speed within the above range.
Select "10," "20" or "40" to set the ten's place of the station number.
Select "1," "2," "4" or "8" to set the one's place of the station number.
Always set the station number within the range of 1 to 64.
1 Duplicate station number cannot be set.
Station Ten's place
number
40 20
1 OFF OFF
2 OFF OFF
3 OFF OFF
4 OFF OFF
: :
10 OFF OFF
11 OFF OFF
: :
64 ON ON
(Example) Set the switches as below when setting the station number to 32:
Station Ten's place
number
40 20
32 OFF ON
Pin header for connection of the adapter power supply, communication line,
I/O power supply, external supply power, and input/output signals (refer to
Chapter 4 for the pin numbers.)
Description
Setting switch status Transmission
2 1
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
One's place
10 8 4
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
: : : :
ON OFF OFF
ON OFF OFF
: : : :
OFF OFF ON
One's place
10 8 4
ON OFF OFF
MELSEC-A
speed
156 kbps
625 kbps
2.5 Mbps
2
5.0 Mbps
10 Mbps
2 1
OFF ON
ON OFF
ON
OFF OFF
: :
OFF OFF
OFF ON
: :
OFF OFF
2 1
ON OFF
2 - 2