Status & Settings Screen navigation
1.
Press the up/down arrows to scroll through the pages.
(See Table 3 below for Settings screen structure).
2.
Press an icon to change the value of an option or enter a
subscreen.
3.
Press Close to return to the previous screen.
Table 3: Status & Settings screen structure
Option
How to view
Event History
Press the Show icon to view system events.
Note: If a # appears in the Event History list, the
event was not sent to the central station.
Direct Bypass
Press the Select icon to enter the sensor bypass
screen.
Panel Status
Press the Listen icon to listen to the status of
your security system. Press Clear to clear the
status.
Chime
Press the On/Off icon to set the chime feature
On/Off.
Note: This option may or may not appear
depending on panel programming.
Special Chime
Press the On/Off icon to set the special chime
feature On/Off.
Note: This option may or may not appear
depending on panel programming.
Lights
Press Control to access the Light screen. From
there you can turn On/Off programmed lights.
Note: Has not been investigated by UL.
Door Locks
Press Control to access the Door Lock screen.
From there you can lock/unlock programmed
door locks.
Note: Has not been investigated by UL.
Voice Volume
Press the arrows to adjust the speech volume
level.
Beep Volume
Press the arrows to adjust the beep volume level.
Press the arrows to adjust the screen's
Brightness
brightness.
Use this feature to set this panel's screen saver
Default Screen
mode. Select "Blank" to have the screen and LED
go dark after a period of inactivity. Otherwise, the
default will be the Home screen and the screen
will always be lit. If AC power is lost, the screen
will go blank after 2 minutes of inactivity to
maximize battery life.
Note: The screen will automatically go blank at
2:00 am daily for 60 minutes.
Calibration
Press the Show icon to enter the calibration
screen. This screen will allow you to recalibrate
the touch screen.
Help
Press the Help icon to access the Help menu.
Set Date/Time
Press Enter to set the date and time.
System Tests
Press Enter to perform a sensor test or system
download.
6
Option
How to view
Programming
Press the Access Codes icon to change existing
or add new access codes.
Press the Security icon to turn downloader
enable on/off and to set the account number.
Press the Phone numbers icon to change existing
or add new phone numbers.
Press the Phone Options icon to access the
following phone options:
•
Manual phone test
•
Fail to communicate
•
DTMF dialing
•
300 BPS enabled
•
Ring hang ring
•
Dialer delay
•
Call waiting code
Press the Sensors icon to access the learn
sensor, edit sensor, and delete sensor options.
Press the Reporting icon to access the following
reporting options:
•
Opening report
•
Closing report
•
Force armed report
•
AC power failure report
•
Panel low battery report
•
Sensor alarm restoral report
•
24 hour sensor tamper
•
Supervisory tamper report
•
No usage report
•
Swinger shutdown
•
Programming report
•
Fire alarm verification
Press the Timers icon to access the following
timers options:
•
Entry delay
•
Exit delay
•
No activity timeout
•
Audio phone test
•
Supervisory time
•
Alarm cancel window
•
RF timeout
•
Fail to open time
•
Fail to close time
•
Siren timeout
•
Unvacated premises
•
Smoke supervision
Press the Touchpad Options icon to access the
following options:
•
Keyfob no delay
•
Panic alarms
•
Remote TP arming
Simon® XTi Installation Guide