TU-CTH100 Welcome We hope you have many years of enjoyment from your new Panasonic Personal Digital Video Recorder (PVR). These simple, easy to follow instructions will enable you to quickly set up and install the equipment and begin your enjoyment of the available services.
TU-CTH100 Warnings and Precautions This Personal Digital Video Recorder (PVR) is intended for the reception of Digital TV picture and sound signals. If the PVR is exposed to drastic temperature changes, e.g. taking it from a cold room to a warm room, connect it to the mains supply and let it stand for at least two hours.
TU-CTH100 Accessories Please confirm you have the following items Item Part Number Mains Lead TSXA143 Operating Instruction Book TQB8E4072 Remote control EURT7636030 2 x Batteries UM-3DJ-2P SCART Lead X1 PANA-003-06 Inserting Remote Control Batteries Remove battery cover Insert batteries Replace battery cover...
TU-CTH100 Connection of Digital Personal Video Recorder to other Equipment Socket Description AV1(TV) Video/RGB/S-Video Output to TV AV2(EXT) Video/RGB Output to External Recording Device RF IN RF out RF Signal Input RF Signal from Terrestrial output to Aerial External Recording...
Pressing the TV/PVR key switches the remote control from operating the PVR unit to operating some functions of your Panasonic TV. If the remote control is in TV mode it will not operate the PVR. When the PVR receives a TV remote command the legend ‘TV’...
TU-CTH100 Front Panel Keys Standby On/Off Button Press to switch box on from standby and off to standby Channel Up/Down Buttons Use to Change the channel being viewed Play Button Press to begin playback of last viewed recording or to stop rewind/fast forward mode...
Standby On/Off key on the remote control or the Power Button on the front of the PVR. The Panasonic start up screen will be displayed and then the Auto setup feature will begin, your stations will be located, sorted into order and stored ready for use.